Powermatic 15HH Instrukcja Użytkownika Pobierz pdf (Strona 39)

Preventive Maintenance

Checklist for Model 15S and 15HH Planers

[ ] Work area around machine marked off clearly.

[ ] Non-skid floor strips in area where operator normally stands.

[ ] Inspect entire machine for loose bolts, nuts, screws. Tighten and replace as necessary.

[ ] Clean table and cutterhead area, removing sawdust and chips with a soft bristle brush. Remove

gum and pitch with oven cleaner.

[ ] Lubricate appropriate places with a good grade non-hardening grease.

[ ] Clean table surface. If rusted, use paste mixture of household ammonia, a good commercial

detergent and 000 steel wool. Wash surface down with hot, soapy water, rinse and dry

thoroughly. Coat surface with talcum powder, rubbing briskly into surface with a clean blackboard

eraser.

[ ] Check blade condition; should be sharp and free of nicks or grooves.

[ ] Check belt condition. Replace as needed. Dress with belt dressing. Check belt tension.

[ ] Check motor for loose wiring and sawdust congestion, pulleys tight and in line.

[ ] Check bearings. Replace any bad or suspect bearings immediately.

[ ] Check leveling of extension tables with main table.

1 2 ... 34 35 36 37 38 39 40

Brak uwag

Powermatic 15HH Instrukcja Użytkownika Strona 39